 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC1413, MC1413B, NCV1413B High Voltage, High Current Darlington Transistor Arrays The seven NPN Darlington connected transistors in these arrays are well suited for driving lamps, relays, or printer hammers in a variety of industrial and consumer applications. Their high breakdown voltage and internal suppression diodes insure freedom from problems associated with inductive loads. Peak inrush currents to 500 mA permit them to drive incandescent lamps. The MC1413, B with a 2.7 kW series input resistor is well suited for systems utilizing a 5.0 V TTL or CMOS Logic. Features http://onsemi.com 16 1 PDIP-16 P SUFFIX CASE 648 * Pb-Free Packages are Available* 1/7 MC1413, B 2.7 k 5.0 k 3.0 k Pin 9 16 1 SOIC-16 D SUFFIX CASE 751B ORDERING INFORMATION Device MC1413D MC1413DR2 Package SOIC-16 SOIC-16 SOIC-16 (Pb-Free) PDIP-16 PDIP-16 (Pb-Free) SOIC-16 SOIC-16 SOIC-16 (Pb-Free) PDIP-16 SOIC-16 Shipping 48 Units/Rail 2500 Tape & Reel 2500 Tape & Reel 500 Units/Rail 500 Units/Tubes 48 Units/Rail 2500 Tape & Reel 2500 Tape & Reel 500 Units/Rail 2500 Tape & Reel Figure 1. Representative Schematic Diagram MC1413DR2G MC1413P MC1413PG 1 2 3 4 5 6 7 8 16 MC1413BD 15 14 MC1413BP 13 12 11 10 9 NCV1413BDR2 MC1413BDR2 MC1413BDR2G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See general marking information in the device marking section on page 4 of this data sheet. (Top View) Figure 2. PIN CONNECTIONS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2004 1 April, 2004 - Rev. 6 Publication Order Number: MC1413/D MC1413, MC1413B, NCV1413B MAXIMUM RATINGS (TA = 25C, and rating apply to any one device in the package, unless otherwise noted.) Rating Output Voltage Input Voltage Collector Current - Continuous Base Current - Continuous Operating Ambient Temperature Range MC1413 MC1413B NCV1413B Storage Temperature Range Junction Temperature Thermal Resistance, Junction-to-Ambient Case 648, P Suffix Case 751B, D Suffix Thermal Resistance, Junction-to-Case Case 648, P Suffix Case 751B, D Suffix Electrostatic Discharge Sensitivity (ESD) Human Body Model (HBM) Machine Model (MM) Charged Device Model (CDM) Symbol VO VI IC IB TA -20 to +85 -40 to +85 -40 to +125 Tstg TJ RqJA 67 100 RqJC 22 20 ESD 2000 400 1500 V C/W -55 to +150 150 C C C/W Value 50 30 500 25 Unit V V mA mA C ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise noted) Characteristic Output Leakage Current (VO = 50 V, TA = +85C) (VO = 50 V, TA = +25C) Collector-Emitter Saturation Voltage (IC = 350 mA, IB = 500 mA) (IC = 200 mA, IB = 350 mA) (IC = 100 mA, IB = 250 mA) Input Current - On Condition (VI = 3.85 V) Input Voltage - On Condition (VCE = 2.0 V, IC = 200 mA) (VCE = 2.0 V, IC = 250 mA) (VCE = 2.0 V, IC = 300 mA) Input Current - Off Condition (IC = 500 mA, TA = 85C) DC Current Gain (VCE = 2.0 V, IC = 350 mA) Input Capacitance Turn-On Delay Time (50% EI to 50% EO) Turn-Off Delay Time (50% EI to 50% EO) Clamp Diode Leakage Current (VR = 50 V) Clamp Diode Forward Voltage (IF = 350 mA) NOTE: TA = +25C TA = +85C All Types All Types VCE(sat) All Types All Types All Types II(on) MC1413, B VI(on) MC1413, B MC1413, B MC1413, B All Types II(off) hFE CI ton toff IR VF - - - 50 1000 - - - - - - - - - 100 - 15 0.25 0.25 - - 1.5 2.4 2.7 3.0 - - 30 1.0 1.0 50 100 2.0 mA - pF ms ms mA V - 0.93 1.35 V - - - 1.1 0.95 0.85 1.6 1.3 1.1 mA Symbol ICEX - - - - 100 50 V Min Typ Max Unit mA NCV1413B Tlow = -40C, Thigh = +125C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control. http://onsemi.com 2 MC1413, MC1413B, NCV1413B TYPICAL PERFORMANCE CURVES - TA = 25C 400 I O , OUTPUT CURRENT (mA) I O , OUTPUT CURRENT (mA) 400 300 MC1413, B 200 300 All Types 200 100 100 0 0 1.0 2.0 3.0 4.0 5.0 8.0 9.0 10 11 12 0 0 50 100 150 200 250 300 350 400 II, INPUT CURRENT (mA) VI, INPUT VOLTAGE (V) Figure 3. Output Current versus Input Voltage Figure 4. Output Current versus Input Current 800 IC , COLLECTOR CURRENT (mA) 700 600 500 400 300 200 All Types 100 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VCE(sat), SATURATION VOLTAGE (V) 1 Output Conducting at a Time PIN 16 PIN 10 PIN 13 I I, INPUT CURRENT (mA) 2.5 2.0 Maximum 1.5 Typical 1.0 0.5 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VI, INPUT VOLTAGE (V) Figure 5. Typical Output Characteristics Figure 6. Input Characteristics - MC1413, B 1000 I C, COLLECTOR CURRENT (mA) NUMBER OF DRIVERS USED 700 500 1 2 3 300 4 200 5 6 7 100 10 20 30 % DUTY CYCLE 50 70 100 Figure 7. Maximum Collector Current versus Duty Cycle (and Number of Drivers in Use) http://onsemi.com 3 MC1413, MC1413B, NCV1413B MARKING DIAGRAMS PDIP-16 P SUFFIX CASE 648 16 MC1413P ULN2003A AWLYYWW 1 1 16 MC1413BP ULQ2003A AWLYYWW SOIC-16 D SUFFIX CASE 751B 16 MC1413D AWLYWW 1 1 16 MC1413BD AWLYWW * A WL YY, Y WW = Assembly Location = Wafer Lot = Year = Work Week *This marking diagram also applies to NCV1413B. http://onsemi.com 4 MC1413, MC1413B, NCV1413B PACKAGE DIMENSIONS PDIP-16 P SUFFIX CASE 648-08 ISSUE R -A- 16 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01 B 1 8 F S C L -T- H G D 16 PL SEATING PLANE K J TA M M 0.25 (0.010) M http://onsemi.com 5 MC1413, MC1413B, NCV1413B PACKAGE DIMENSIONS SOIC-16 D SUFFIX CASE 751B-05 ISSUE J -A- 16 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 -B- 1 8 P 8 PL 0.25 (0.010) M B S G F K C -T- SEATING PLANE R X 45 _ M D 16 PL M J 0.25 (0.010) TB S A S ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MC1413/D |
Price & Availability of MC1413DR2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |